Power Supply
Rated input voltage/frequency: 3 Phase 415V 50Hz/60Hz
Permissible voltage fluctuation: 320 to 460V
Permissible frequency fluctuation: ±5%

Control Characteristic
Control mode: Space Vector SVPWM and Flux Vector Control
Frequency Control range: 0.1 ~ 400 Hz
Frequency Accuracy: Digital setting 0.01%, Analog instruction 0.1% (Max frequency)
Frequency resolution: Digital instruction 0.1Hz, Analog instruction 0.1 Hz.
Accelerated / decelerated time: 0.0 ~ 3600 Sec. Four accelerate/decelerate time settings available
Multi Speed running: Built-in PLC program
Built-in PI: Easy to set up a simple Automatic control system
Built-in Counter: Automatically Controlled Production line can be achieved with combination of built-in PLC
Overload Capacity: 150% rated current for 1 min. P type - 120% rated current for 1 min
Braking torque: About 20% (with brake resistor is about 150%)
V/F mode: 3 preset V/F mode and V/F program wilfully
Automatic Energy Saving Operation: Change the V/F curve according to the load save energy
Automatic Voltage Regulation: Regulates the voltage automatically whenever there is a change in grid voltage

Operation Function
Operation Commands: Keypad and External terminals given
Frequency Setting: Digital setting, Analog Voltage setting, Analog Current setting
Input Signal: Forward/Reverse, Jogging selection, Multi Speed Control, Regular Stopping
Output signal: Fault Alarm Output (250V/2A Contact), Open Collector Output

Protection Functions
Over Current, Over Voltage, Under Voltage, Over heat, Overload, Phase loss

Operating conditions
Operating environment: Temperature:10 ~ 40 Degree C, Humidity: < 90%, No condensation, IP20
Operations Area: Indoor, <1000m altitude above sea level
Storage Temperature: -20 ~ +60 Degree C
Vibration: <5.9 m/s2 (0.6g)

Downloads:
Working Manual