Kusam meco KM-130D is suitable for measuring materials that are good ultrasonic conductor such as metal, plastic, ceramic, glass etc. As long as the measured part in two parallel surfaces for measurement of thickness. This unit is not suitable for cast iron due to its big crystalloid composition.

General Specifications :
• Display : 4 digit backlight LCD display
• Measuring Range : 1.0 ~ 220 mm (steel)
• Accuracy : ±(1%H + 0.1) mm
• Resolution : (<100 mm) 0.1 mm
• Sound velocity Range : 1000 ~ 9999 m/s
• Frequency : 5MHz
• Operation temperature : 0 ~ 45 °C
• Sensor operation temperature : 0 ~ 60 °C
• Minimum limit for Tube measuring : Ф 10mm probe ： Ф20x 3mm (steel)
• Working Frequency : 5 MHz
• Minimum Display unit : 0.1mm
• Operating Temperature : 0°C ~ 40°C
• Operating Current : Normal operating current ≤ 50mA with
backlight turn on current ≤ 120mA; Stand-by Current : ≤ 20µA
• Power Supply : 1.5V AA x 3 Alkaline Batteries.
• Dimension : 70 x 138 x 31 mm

Features :
• Sound velocity selection : Unit preset 10 kinds materials velocity inside
• Auto calibration to assure the accuracy
• Auto linear compensation : this advanced software program enhances the precision by correcting the non-linear accuracy of transducer
• Use “VEL” key to make a quick select for the sound velocity of 10 kinds in common use materials
• Coupling status indication : observing the coupling icon to learn if the coupling is accomplished or not.
• Low battery indication
• Auto power off